Author Index

A

  • Aalami, M.R. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
  • Abbasi, E. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Abbasi, S. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
  • Abbassi, A. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
  • Abbassi, A. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Abdolahi, S. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
  • Abdolahzade Gavgani, M. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Abdolhoseini, M. J. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
  • Abolmasoumi, A. H. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Afshari, H. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
  • Aghaei, A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
  • Ahmadi, S. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Ahmadi Najafabadi, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Akbari, M. H. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
  • Akhgari, R. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Alamian, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Alimirzaloo, V. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Alinejad, G.M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Alizadeh, A.A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
  • Allahyari, E. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
  • Amanifard, N. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Amarloo, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Ameri, M. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
  • Amoozgar, M. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Ansari, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
  • Ashrafizaadeh, M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
  • Atashkari, K. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Azimi, A. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
  • Azimifar, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]

B

  • Babazadeh Baie, N. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Bahrami, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Bakhshi, M. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Bakhshi, M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Bak Khoshnevis, A. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
  • Bak Khoshnevis, A. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
  • Barzanooni, V. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
  • Barzanooni, V. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
  • Bazargan, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
  • Beyranvand, M. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
  • Bidzard, A. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Bordbari, H. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
  • Borji, M. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Bozorg, M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]

C

  • Chakherlou, T.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]

D

  • Dashti Rahmatabadi, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Dehghan, A. A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Dehghan Manshadi, M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Dolati, S. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Donyavi, A. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Dorari, E. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]

E

  • Eatemadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Eftekhari, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Esmailian, Ehsan Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Etemadi, A. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]

F

  • Fadaee, M. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
  • Fallah, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Fallahi Arezoodar, A. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Farahinia, A. R. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Fathi, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Fathi, S. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Firouzi, B. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]

G

  • Ghadiri, M. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
  • Ghaffari, A. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Ghahramani, N. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Ghassemi, H. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
  • Ghassemi, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Ghazanfarian, J. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
  • Ghodsbin Jahromi, A. Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
  • Ghorbani, S. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Ghoreishi, M. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Gorji, A. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Gorji, H. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]

H

  • Hadad, K. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Hadidoolabi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
  • Haghighat, H. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
  • Haghparast, A. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Hajhashemkhani, M. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
  • HajiAliMohammadi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Hajidavalloo, E. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
  • Haji ghafoori boukani, N. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
  • Hashemabadi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
  • Hashemi, S. A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
  • Hashemzadeh, S.M. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
  • Hatami, Hossein Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
  • Heidary, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Hematiyan, M.R. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
  • Honarpisheh, M. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
  • Hosseinalipoor, S. M. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
  • Hosseini, S.M. A. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
  • Hosseini Abadshapoori, M. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
  • Hosseini Toudeshky, H. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]

J

  • Jaamialahmadi, A. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
  • Jafari-Talookolaei, R.-A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
  • Jahani, H. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Jalili, M. M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
  • Jamaati, J. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Jamshideasli, D. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]

K

  • Kalteh, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Kamali Moghadam, R. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
  • Kamalinia, A. H. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Kariman, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Kazemzadeh Hannani, S. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
  • Keshavarz, M. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Khani, L. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
  • Khatoonabadi, S. M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
  • Khazaee, A. M. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Kheradmand, S. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
  • Khodaparast, Sh. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Khoddami, A.S. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Khorram, A. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Kolak, H. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]

L

  • Laraibi, I. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Loghman, A. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]

M

  • Mahdizade, E. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
  • Mahmoodi, M. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Mahmoudi, S. M. S. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
  • Mahzoon, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Maleki, H.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
  • Maleki Nejad, J. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Mani, M. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
  • Mansoori, Z. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
  • Mantashloo, R. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
  • Marzban Shirkharkolaee, E. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Masoumi Dehaghi, E. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Mehdizadeh, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Mehrabi, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Mesgarpoor Tousi, A. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
  • Moayyedi, M. K. Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
  • Mohaddes Deylami, H. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Mohammadi, A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Mohammadi, R. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Mohammadi Hooyeh, H. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
  • Mohammadimehr, m. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
  • Mohammadimehr, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Mohammad Nabi, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Mojra, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Molaeimanesh, G. R. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
  • Mollamahdi, M. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
  • Montazerin, N. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
  • Moravej Barzani, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Moslemi Naeini, H. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Movahedi, A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]

N

  • Nabavi, S. M. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
  • Najjarnezami, A. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
  • Nassiri Toosi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Navabi Nezhad, S. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
  • Nazari, M. Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
  • Nazari, M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Nazemnezhad, R. Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
  • Niazmand, H. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Nikbakht, A. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Nima Shojaee, S. M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Nosratollahi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]

P

  • Parsa, H. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
  • Pirkandi, J. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Pirkandi, J. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Poolaei Moziraji, Z. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]

R

  • Rabiee, A. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Rahmati, A.R. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
  • Rasi Marz-Abadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Rasoolizadeh Shooroki, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Razavi, S. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]

S

  • Sadighi, M. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Saeedifar, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Saeidi, H. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
  • Safari, M. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
  • Safarpour, H. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
  • Safdarian, R. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Saffar-Avval, M. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
  • Safizadeh, M.S. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
  • Saidi, M. H. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
  • Salmani Tehrani, M. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Samarikhalaj, H. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Sarhaddi, F. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
  • Sattarifar, I. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Sedighi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Shafaghat, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Shahedi, s. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
  • Shahi Ashtiani, M.A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Shahmardan, M.M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Shahmohammadi, A. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Shahverdi, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Shakeri, M. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
  • Shakeri, M. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Sheikhan, S. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Sheikhzadeh, Gh. A. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
  • Shooshtari, A. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
  • Shooshtari, A. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
  • Siadaty, M. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
  • Soleymani, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]

T

  • Taghavi, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Taghavi Zenouz, R. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
  • Talebi, S. S. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
  • Torabi, K. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
  • Tourajizadeh, H. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]

V

  • Velayatimehr, S Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]

Y

  • Yaghoubi, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Yari, E. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
  • Yousefi, A. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Yousefi, A. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]

Z

  • Zakerdoost, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Zamanian, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Zareei, A. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
  • Zare Mehrjardi, M. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Ziaee Shahraki, A. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]